Climate Control Solutions

Heating

Heating Range

Stego enclosure heaters are the answer for protecting valuable equipment from condensation damage. Outdoor equipment is particularly at risk since condensation occurs with the shift between day and night temperatures. Seasonal climatic changes or sudden temperature drops during summer thunderstorms can also produce significant condensation damage.

Even indoor systems are put at risk by the formation of condensation through temperature variations also, for example, when equipment is turned off for the night. There are two main types of Stego heaters:

1. PTC Convection Heaters are ideal for use in tall narrow enclosures; these heaters function best when mounted near the bottom of the enclosures, in conjunction with a thermostat mounted in the upper section of the enclosure to maintain the desired temperature. The convection heating capabilities are available from 10 W to 150 W

2. Fan Heaters are ideal when higher heating capacities or greater air circulation is required. The CR range have a built in adjustable thermostat, all others require a thermostat mounted in the upper section of the enclosure to maintain the desired temperature.The fan heating capabilities are available from 100 W to 1200 W

Stego HGK 047 - Miniature variable PTC heater with moulded power lead

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured.

Dynamic heating up
Energy saving
Wide voltage range
Temperature limiting
Clip fixing 35 mm DIN

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
10 Watts	120-240 V AC/DC	50	25	50	HGK04700
20 Watts	120-240 V AC/DC	60	25	50	HGK04701
30 Watts	120-240 V AC/DC	70	25	50	HGK04702
					All

Stego HG 140 - Variable PTC heater with insulated spring clamp terminals

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The pressure clamp connection saves time and simplifies installation.

Pressure clamp connection
Dynamic heating up
Wide voltage range
Temperature limiting
Energy saving
Clip fixing 35 mm DIN
Quick installation

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
10 Watts	120-240 V AC/DC	109	70	60	HG14000
30 Watts	120-240 V AC/DC	109	70	60	HG14001
45 Watts	120-240 V AC/DC	109	70	60	HG14003
60 Watts	120-240 V AC/DC	184	70	60	HG14005
75 Watts	120-240 V AC/DC	184	70	60	HG14006
100 Watts	120-240 V AC/DC	184	70	60	HG14007
150 Watts	120-240 V AC/DC	264	70	60	HG14008
					All

Stego CSK 060 - Touch safe small heater

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation.

Low surface temperature
Double insulated (plastic housing)
Wide voltage range
Temperature limiting
Dynamic heating up
Clip fixing

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
20 Watts	120-240 V AC/DC	98	38	75	CSK06030

Stego HVL 031 - Slimline fan heater

This compact high-performance fan heater prevents formation of condensation in control or switch systems and provides an evenly distributed interior air temperature in enclosures.

Compact
Flat design
High air through-flow
Temperature safety cut-out

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
100 Watts	230 V AC 50/60 Hz	80	112	47	HVL03102
150 Watts	230 V AC 50/60 Hz	80	112	47	HVL03103
200 Watts	230 V AC 50/60 Hz	119	151	47	HVL03113
300 Watts	230 V AC 50/60 Hz	119	151	47	HVL03114
400 Watts	230 V AC 50/60 Hz	119	151	47	HVL03115
					All

Stego HGL 046 - Compact fan heater

This compact fan heater prevents the formation of condensation. The integrated high performance axial fan provides forced air circulation and so guarantees an even temperature in enclosures. With internal terminal connector.

Compact Design
Clip fixing 35 mm DIN
Long service life
Maintenance free
Temperature safety cut-out

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
250 Watts	230 V AC 50/60 Hz	182	100	85	HGL04640
400 Watts	230 V AC 50/60 Hz	222	100	85	HGL04641
					All

Stego CR 027 - Semiconductor fan heater

Semiconductor fan heaters prevent the formation of condensation and ensure an even temperature in switch and control equipment. The built-in regulator is used to set the desired temperature.

Compact
Heating capacity adjusts to ambient temperature
Adjustable temperature range
Clip fixing 35 mm DIN
Optical indicator
Temperature safety cut-out

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
550 Watts	220-240 V AC 50/60 Hz	165	100	128	CR02701000

Stego CR 130 - High performance fan heater

The compact high performance fan heater prevents formation of condensation and provides an evenly distributed interior air temperature in enclosures with electric/electronic components.

Compact design
Double insulated
Integrated thermostat or hygrostat
Optional clip or screw fixing

Heating capacity @ 20°C	Power Supply	Dimensions			Cat. No.	PDF Data Sheet	CAD Files
W	V - ph - Hz	H	W	D	Cat. No.	PDF Data Sheet	CAD Files
950 Watts	230 V AC 50/60 Hz	99	160	182	CR130510